Far North speed limits cut as average-speed cameras set for activation

One of the controversial new average-speed cameras that will soon be operating on Kaitāia–Awaroa Rd in the Far North.
One of the controversial new average-speed cameras that will soon be operating on Kaitāia–Awaroa Rd in the Far North.

Speed limits on five stretches of Far North highway have been reduced as NZ Transport Agency Waka Kotahi activates controversial average speed safety cameras on another road.

After reducing speed limits from 100km/h to 80km/h, then reversing them to 100km/h last year under the coalition Government, NZ Transport Agency (NZTA) again proposed lowering speed limits on some sections of the Far North’s state highways.

It put the proposal out for public consultation and after consideration, NZTA confirmed the new speed limits: State Highway 1 Moerewa to Kawakawa – 80km/h, down from 100km/h; SH10 Kaingaroa north – 80km/h, down from 100km/h; SH10 Kaingaroa south – 80km/h, from 100km/h; SH12 Ōpononi north – 60km/h, from 100km/h, and SH12 Ōpononi – 50km/h, from 70km/h.

The current speed limits will remain until new signage has been erected.

NZTA said the changes aim to improve safety and respond to community feedback.

“We’re now working through the next steps to implement the new speed limits and expect to begin implementation later this year. We will publish the implementation dates on the project webpage once they are confirmed and let local communities and road users know before the changes take effect,” NZTA said.

“Thank you to everyone who took the time to share their views during consultation. We considered all feedback alongside technical assessments, safety impacts, travel time and cost estimates, and other relevant information when making our final decisions.”

The 100km/h speed limit on four stretches of Far North state highway have been reduced by NZTA, with one 70 km/h stretch also reduced to 50km/h.
The 100km/h speed limit on four stretches of Far North state highway have been reduced by NZTA, with one 70 km/h stretch also reduced to 50km/h.

Meanwhile, NZTA said it will soon activate average-speed safety cameras on Kaitāia-Awaroa Rd, west of Kaitāia.

Average-speed safety cameras are controversial, sparking debates over privacy, government revenue-gathering versus true safety, and the fairness of automated enforcement networks. Proponents argue they effectively lower the number of severe crashes over long stretches of road, but critics question their overall impact and the oversight of data collected.

NZTA said cameras were placed at locations where evidence shows people have been or are more likely to be killed or seriously injured in a crash.

Average-speed safety cameras (point to point) are the most effective camera type at reducing deaths and serious injuries, NZTA said. It said the cameras were already having an impact.

Average-speed safety cameras work by measuring how long it takes to travel between two cameras along a road. NZTA sets two or more cameras on a stretch of road, some distance apart. When a vehicle passes the first camera it records the time. When it passes the second camera it records the time again.

NZTA calculates how long a vehicle took to travel between the cameras (average speed). Motorists can expect to be fined if their average speed is over the speed limit.

One contentious aspects of the cameras is their use of automated number plate recognition as they track and log every passing vehicle, raising widespread fears about mass surveillance, potential data misuse by authorities and “scope creep” where a tool introduced for road safety is later leveraged for general tracking.

NZTA said it only uses automated number plate recognition software to match vehicle images from both cameras and confirm it’s the same vehicle.